Advanced Solar PV System Design & Engineering
A structured 3-month professional program designed to move learners from solar fundamentals to practical PV design and engineering workflow.
Save SAR 2,000 on the current launch tuition.
The SAR 5,000 figure is the standard course tuition; SAR 3,000 is the current launch tuition. Workshop and course are separate offerings.
Join a Free 20-Minute Solar Engineering Discussion
Before you commit to a paid program, join a short live discussion with the academy. Ask about the course, software workflow, PV design, project practice, your current skill level and what you want to achieve.
3-Day Live PVsyst Workshop — SAR 300
Use the workshop as a focused introduction to PVsyst before deciding whether the full 3-month engineering program matches your goals.
Day 1 — Build the project correctly
- Create a PVsyst project and define the geographical situation and weather data.
- Set project variants and plane orientation.
- Define system components and understand the consistency checks before simulation.
- Understand the design workflow from project setup to simulation.
Day 2 — Shading & losses
- Understand far and near shading concepts.
- Build/understand 3D shading scenes and the role of horizon and nearby obstacles.
- Work through detailed losses including soiling, IAM, temperature, mismatch, wiring and system unavailability.
- Understand linear and electrical shading losses.
Day 3 — Simulate, read & report
- Run simulations and interpret the main results.
- Read the loss diagram, monthly results, yield and performance indicators.
- Compare variants and identify design weaknesses.
- Understand the structure of a professional PVsyst simulation report.
Workshop learning points are based on the official PVsyst project-design, shading, losses, simulation and results documentation. PVsyst documentation describes project definition, orientation, system definition, detailed losses, horizon/near shading, simulation and reporting workflows.
By the end of the full program, students can work through a complete PV design workflow
Design & sizing
- Assess energy requirements and solar resource inputs.
- Size PV systems and evaluate DC/AC ratio decisions.
- Select modules and inverters using electrical limits and project requirements.
- Develop stringing and MPPT allocation logic.
Engineering calculations
- Perform DC/AC cable sizing and voltage-drop checks.
- Apply practical electrical design checks, protection concepts and documentation logic.
- Evaluate system losses, yield, specific yield and performance indicators.
Industry software workflow
- Produce professional 2D drawings and solar layouts in AutoCAD.
- Model roofs, structures and obstructions in SketchUp 3D.
- Use HelioScope for layout and design workflow.
- Use PVsyst for simulation, loss analysis, yield assessment and reporting.
Project documentation
- Understand SLD, layout, stringing, BOQ and technical-report workflows.
- Review a design before submission or client presentation.
- Build a repeatable engineering workflow for residential, commercial and GCC-focused projects.
Important: the program develops practical design skills; it does not by itself guarantee employment, professional registration, authority approval or a particular job outcome.
Mohammad Arshad
Senior Solar Design Engineer
Academic Director, GCC Solar Academy
Training is built around the engineering workflow used to turn a project brief into a documented PV design — not simply around clicking through software menus.
Professional experience presented by GCC Solar Academy:
- 7+ years of solar PV design and engineering experience.
- Project exposure across India, the United States and Saudi Arabia.
- Experience working with PV system design, engineering calculations, software-based modelling and project documentation.
- Experience with on-grid, hybrid/storage and commercial PV design workflows, including battery considerations.
- Experience working with NEC-based U.S. project requirements and GCC/Saudi-focused design considerations.
- Designed solar projects including a 2.5 MW project associated with Princess Nourah bint Abdulrahman University (PNU).
- Solar design experience covering approximately 1,500 government-school projects across the Kingdom of Saudi Arabia, as stated by the academy.
- Training emphasis on PVsyst, AutoCAD, SketchUp 3D, HelioScope, system sizing, stringing, cable/voltage-drop calculations, yield analysis and engineering documentation.
Project names, capacities and experience figures should be supported by appropriate portfolio evidence, employment/project records or anonymized documentation when presented to prospective students.
Project environments covered in the training
University-scale PV
2.5 MW-class project workflow: site assumptions, system sizing, stringing, inverter allocation, yield modelling and engineering documentation.
Government & institutional rooftops
Large portfolios require repeatable design standards, drawing discipline, equipment selection, documentation and quality checks.
Commercial & industrial rooftops
Learn how to coordinate module layouts, electrical design, cable routing, inverter selection, performance modelling and documentation.
Solar carports
Work through layout constraints, structure coordination, clearances, cable routing and PV yield considerations.
Hybrid & battery systems
Understand PV-plus-storage design logic, battery sizing concepts, energy-flow considerations and system losses.
GCC-focused project scenarios
Use Saudi/GCC climate, soiling, rooftop and engineering-documentation considerations as part of design practice.
The additional project categories above are training scenarios, not claims of specific completed projects unless individually documented in the academy portfolio.
Apply for the 3-Month Professional Course
Standard tuition: SAR 5,000 | Current launch tuition: SAR 3,000
Admissions: admissions@gccsolaracademy.com
دورة تصميم أنظمة الطاقة الشمسية الكهروضوئية
دورة متخصصة في تصميم أنظمة الطاقة الشمسية الكهروضوئية وهندسة الطاقة الشمسية، مع التركيز على التصميم العملي، حسابات الأحمال والكابلات، PVsyst، AutoCAD وHelioScope.
تقدم GCC Solar Academy تدريبًا احترافيًا للمهندسين والمهنيين الراغبين في تطوير مهاراتهم في تصميم أنظمة الطاقة الشمسية ومشاريع الطاقة الكهروضوئية في السعودية ودول الخليج.
